Scania fault code 805

BMU Battery Management Unit The level monitor for the inverter E82 (MGU) and direct current converter E84 (DCC) indicates low coolant level Low coolant level in the inverter and direct current converter cooling system. Signal from the level monitor. Read explanation → COO Coordinator Voltage supply, relay 19 Signal (61) from relay 19 is interrupted. Read explanation → MBS Refrigerant system passenger area, pressure too low The pressure sensor for the climate system reports too high a pressure. Read explanation → DDU Missing CAN-messages from DCP No CAN message recieved from Driver interaction Control Pane (DCP). Only stored when ignition is ON. Read explanation → CMS Solenoid valve for differential lock, 2nd rear axle Solenoid valve V1005 controlling the differential lock for the second rear axle, connected on PWM output 4 (Pin: signal A16, earth A18) has overloaded. Read explanation → DCU Micro switch rear door leaf, door lock, open circuit The measured voltage on the input pin, 3-phase input, to the door control unit indicates an open circuit. This occurs when the measured voltage is approx. 8 – 16 V and the supply v… Read explanation →