Scania fault code 835

EMS Engine Management System Camshaft position sensor T135 The camshaft position sensor is short-circuited to battery voltage. Read explanation → EMD Camshaft position sensor T135 The camshaft position sensor is short-circuited to battery voltage. Read explanation → EME Camshaft position sensor T135 The camshaft position sensor is short-circuited to battery voltage. Read explanation → EMO Camshaft position sensor T135 The camshaft position sensor is short-circuited to battery voltage. Read explanation → VDT Gearbox oil The limit value for the gearbox oil temperature has been exceeded. Read explanation → COO Coordinator CAN communication with switch module Fault in communication with the switch module. Read explanation → MBS #Not implemented. Drivers convector valve defective Feedback sensor is out of range or short circuit in flap control Read explanation → CMS Solenoid valve for the tag axle lifting bellows, open circuit or short circuit to earth Solenoid valve for the tag axle lifting bellows, PWM output 4 (A18), has an open circuit or is short-circuited to earth. Read explanation → DCC CAN communication, direct current converter E90 - Specific CAN message is missing. - Specific CAN message is corrupted. Read explanation →