Applies to: EMO2 (EMS)
What does Scania EMO fault code 4614 mean?
The engine speed has increased without a fuel request.
What causes Scania DTC 4614?
- Oil leaks in the intake system from the turbocharger or crankcase ventilation. - Fuel leak from one or more injectors to the cylinders.
How does the system react?
Provides torque reduction and a red engine warning indication is displayed. The exhaust brake is activated and tries to force down the engine speed to 1,300 rpm. If this is not successful, the throttle will also be used to reduce the engine speed. During this time, it is not possible to request torque. The fault continues to be active until the engine is stationary.
How to fix Scania EMO fault code 4614?
- Check whether there is oil in the intake system.
- Check the oil level and oil quality.
- If the oil level is high or the oil contains large amounts of diesel, it is probably leakage from the injectors.
- Run Plug test – checking for internal leakage using the starter motor.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.