Scania AMS DTC 4384 Midbed NOx sensor (pre-ASC2) supply, short circuit to ground

AMS AMS besturingseenheid · Scania

Code 4384 (decimaal). Sommige diagnoseapparaten tonen deze hexadecimaal als 001120.

Kort samengevat

The EEC control unit (E67) is indicating a short circuit to ground fault on the pins connected to the midbed NOx sensor (pre-ASC2) supply.

Van toepassing op: AMS2

Wat betekent Scania AMS foutcode 4384?

The EEC control unit (E67) is indicating a short circuit to ground fault on the pins connected to the midbed NOx sensor (pre-ASC2) supply.

Wat veroorzaakt Scania DTC 4384?

1: T294 (NOx sensor upstream of ASC2) - Supply short circuit to ground

Hoe lost u Scania AMS foutcode 4384 op?

  1. Check for short circuit to ground faults on the pins on the EEC control unit (E67) that are connected to the midbed NOx sensor (pre-ASC2) supply.
  2. For a detailed harness and pin description see the electrical component, under the check tab, in the diagnostic tool.
  3. For a general description about different methods for electrical failure checks see the work shop manual subgroup 16-70.
  4. In order to inactivate the electrical fault code it is necessary to restart the EEC control unit.

Deze informatie is uitsluitend bedoeld als richtlijn. Volg altijd de werkplaatshandleiding van de fabrikant en de veiligheidsprocedures; neem bij twijfel contact op met een erkende werkplaats.

Code 4384 in andere Scania systemen

Vergelijk code 4384 in elk systeem →