Scania AMS DTC 4384 Midbed NOx sensor (pre-ASC2) supply, short circuit to ground

AMS Блок управления AMS · Scania

Код 4384 (десятичный). Некоторые диагностические приборы показывают его в шестнадцатеричном виде как 001120.

Кратко

The EEC control unit (E67) is indicating a short circuit to ground fault on the pins connected to the midbed NOx sensor (pre-ASC2) supply.

Применяется к: AMS2

Что означает код неисправности Scania AMS 4384?

The EEC control unit (E67) is indicating a short circuit to ground fault on the pins connected to the midbed NOx sensor (pre-ASC2) supply.

Что вызывает код DTC 4384 Scania?

1: T294 (NOx sensor upstream of ASC2) - Supply short circuit to ground

Как устранить код неисправности Scania AMS 4384?

  1. Check for short circuit to ground faults on the pins on the EEC control unit (E67) that are connected to the midbed NOx sensor (pre-ASC2) supply.
  2. For a detailed harness and pin description see the electrical component, under the check tab, in the diagnostic tool.
  3. For a general description about different methods for electrical failure checks see the work shop manual subgroup 16-70.
  4. In order to inactivate the electrical fault code it is necessary to restart the EEC control unit.

Эта информация предназначена только для справки. Всегда следуйте руководству по ремонту производителя и правилам техники безопасности; в случае сомнений обратитесь в авторизованную мастерскую.

Код 4384 в других системах Scania

Сравнить код 4384 во всех системах →