Scania PCS felkoder
Alla 240 Scania PCS felkoder, med betydelse, orsaker och åtgärder.
Styrenheter:
PCS1 (PCS)
Visar 121–180 av 240 koder
- 1780hex 0006F4 P160 oil level sensor - Open Load or short to battery
- 1781hex 0006F5 Emma oil temperature sensor - Short circuit to ground
- 1782hex 0006F6 Emma oil temperature sensor - Open Load or short to battery
- 1783hex 0006F7 Emma oil temperature sensor - Internal fault
- 1784hex 0006F8 P160 oil temperature sensor - Short circuit to ground
- 1785hex 0006F9 P160 oil temperature sensor - Open Load or short to battery
- 1786hex 0006FA Emma oil level sensor - low oil level
- 1787hex 0006FB Emma oil level sensor - critically low oil level
- 2304hex 000900 EMMA electric machine speed not available
- 2305hex 000901 ICE Speed Not Available
- 2306hex 000902 Output SHaft Speed Not Available
- 2307hex 000903 L1 Disengage state implausible
- 2308hex 000904 L2 Disengage state implausible
- 2309hex 000905 Status för kopplingshylsa L1, inte tillförlitligt värde
- 2310hex 000906 Status för kopplingshylsa L2, inte tillförlitligt värde
- 2311hex 000907 Varvtal på utgående axel och ingående axel, inte tillförlitligt värde
- 2312hex 000908 Varvtal på elmaskin och utgående axel, inte tillförlitligt värde
- 2313hex 000909 CAN-buss 1, elektriskt fel
- 2314hex 00090A CAN-buss 2, elektriskt fel
- 2315hex 00090B CAN-buss 3, elektriskt fel
- 2316hex 00090C CAN-buss 4, elektriskt fel
- 2317hex 00090D Gaspedalens version, inte tillförlitligt värde
- 2318hex 00090E DLN1 accelerator pedal signal is missing
- 2584hex 000A18 Kopplingshylsa för L1, saknad urkoppling
- 2585hex 000A19 Kopplingshylsa för L1, saknad urkoppling
- 2586hex 000A1A Kopplingshylsa för L1, oväntad rörelse
- 2587hex 000A1B Kopplingshylsa för L1, saknad inkoppling
- 2588hex 000A1C Kopplingshylsa för L1, saknad inkoppling
- 2589hex 000A1D Kopplingshylsa för L1, oväntad rörelse
- 2590hex 000A1E Kopplingshylsa för L1, saknad inkoppling
- 2591hex 000A1F Kopplingshylsa för L1, saknad inkoppling
- 2592hex 000A20 Kopplingshylsa för L1, oväntad rörelse
- 2593hex 000A21 Kopplingshylsa L1, fast i inkopplat läge
- 2594hex 000A22 Kopplingshylsa L1, urkoppling misslyckad
- 2595hex 000A23 Kopplingshylsa L1, oväntad lägesändring
- 2596hex 000A24 Kopplingshylsa L2, fast i inkopplat läge
- 2597hex 000A25 Kopplingshylsa L2, urkoppling misslyckad
- 2598hex 000A26 Kopplingshylsa L2, oväntad lägesändring
- 2599hex 000A27 Kopplingshylsa L2, fast i urkopplat läge
- 2600hex 000A28 Kopplingshylsa L2, inkoppling misslyckad
- 2601hex 000A29 Kopplingshylsa L2, oväntad lägesändring
- 2602hex 000A2A Kopplingshylsa L2, fast i urkopplat läge
- 2603hex 000A2B Kopplingshylsa L2, inkoppling misslyckad
- 2604hex 000A2C Kopplingshylsa L2, oväntad lägesändring
- 2605hex 000A2D Kopplingshylsa L2, fast i inkopplat läge
- 2606hex 000A2E Kopplingshylsa L2, urkoppling misslyckad
- 2607hex 000A2F Kopplingshylsa L2, oväntad lägesändring
- 2624hex 000A40 Kopplingshylsa L1, orimligt värde från lägesgivaren
- 2625hex 000A41 Kopplingshylsa L1, falsk indikering för urkoppling
- 2626hex 000A42 Kopplingshylsan L2, orimligt värde från lägesgivaren
- 2627hex 000A43 Kopplingshylsa L2, falsk indikering för urkoppling
- 2640hex 000A50 Lägesgivare för kopplingshylsa L1, avvikande värde
- 2641hex 000A51 Change gear control detected electric machine synchronization speed hunt - Plausibility error on position L2
- 2726hex 000AA6 Oil sump temperature implausible: Unreasonably high or low temperature compared to other oil temperatures.
- 2727hex 000AA7 Electric machine outlet oil temp implausible: Unreasonably high or low temperature compared to other oil temperatures.
- 2728hex 000AA8 Electric machine inlet oil temp implausible: Unreasonably high or low temperature compared to other oil temperatures.
- 2729hex 000AA9 Oil System Temperature difference between EM inlet and outlet oil
- 2730hex 000AAA Very high oil sump temperature.
- 2731hex 000AAB Very high oil System Inlet temperature
- 2732hex 000AAC Very high electric machine outgoing oil temperature.