Scania MBS DTC 543 #Not implemented. Absence of CAN bus 3 communication

MBS หน่วยควบคุม MBS · Scania

รหัส 543 (เลขฐานสิบ) เครื่องมือวินิจฉัยบางเครื่องแสดงเป็นเลขฐานสิบหกคือ 021F

สรุปสั้น ๆ

The fault is validated as present if the ECU does not detect communication on CAN bus 3 within the timeout period

ใช้ได้กับ: MBS3 (MBS)

รหัสข้อผิดพลาด Scania MBS 543 หมายความว่าอย่างไร?

The fault is validated as present if the ECU does not detect communication on CAN bus 3 within the timeout period

อะไรเป็นสาเหตุของรหัส DTC 543 ของ Scania?

• Defect wiring for CAN bus 3. • Defect ECU unit(s) on CAN bus 3.

ระบบมีปฏิกิริยาอย่างไร?

Functions dependent on information from CAN bus 3 are degraded/missing in MBS (Master)

มีอาการอย่างไรบ้าง?

MBS expansion node J, K, L and M are connected to CAN bus 3, meaning that components connected to those nodes may not work as intended.

วิธีแก้ไขรหัสข้อผิดพลาด Scania MBS 543?

  1. Trouble shoot CAN bus 3 cable harness and connectors.
  2. Check connector for CAN bus 3 on MBS
  3. Check wiring for CAN bus 3:
  4. Measure the resistance (with the battery disconnected) between CAN-high and CAN-low.
  5. It should be close to 60 ohm (one 120 ohm termination resistor in each end of the CAN-bus).
  6. Measure the resistance (with the battery disconnected) between CAN-high on MBSM and CAN-high on any other unit on CAN bus 3.
  7. It should be close to zero ohm.
  8. Measure the resistance (with the battery disconnected) between CAN-low on MBS and CAN-low on any other unit on CAN-bus 3.
  9. It should be close to zero ohm.

ข้อมูลนี้ใช้เป็นแนวทางเท่านั้น โปรดปฏิบัติตามคู่มือการซ่อมของผู้ผลิตและขั้นตอนความปลอดภัยเสมอ หากไม่แน่ใจ ให้ติดต่อศูนย์บริการที่ได้รับอนุญาต

รหัส 543 ในระบบอื่นของ Scania

เปรียบเทียบรหัส 543 ในทุกระบบ →