Scania ABS DTC 72 Wheel speed

ABS Anti-lock Braking System · Scania

Code 72 (decimal). Some diagnostic tools show it in hexadecimal as 0048.

In short

Wheel slip has continued for at least 16 seconds on the right-hand side of the driving axle.

Applies to: ABS E

What does Scania ABS fault code 72 mean?

Wheel slip has continued for at least 16 seconds on the right-hand side of the driving axle.

What causes Scania DTC 72?

The ABS control valve is not working correctly or incorrect speed signal from wheel speed sensor.

How does the system react?

ABS, TC and hill hold function cease to function, if applicable. The warning lamp comes on.

How to fix Scania ABS fault code 72?

  1. Check the wheel bearing play and make sure the pulse ring is not damaged.
  2. Adjust the wheel speed sensor.
  3. The distance to the pulse ring must not exceed 0.7 mm.
  4. Check the operation of the control valve using the diagnostic program.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 72 in other Scania systems

Compare code 72 in every system →