Scania ABS DTC 76 Wheel speed

ABS Anti-lock Braking System · Scania

Code 76 (decimal). Some diagnostic tools show it in hexadecimal as 004C.

In short

An implausibly high speed signal from the wheel on the right-hand side of the driving rear axle.

Applies to: ABS E

What does Scania ABS fault code 76 mean?

An implausibly high speed signal from the wheel on the right-hand side of the driving rear axle.

What causes Scania DTC 76?

Brakes are sticking or shuddering. The fault can also occur in case of a loose connection.

How does the system react?

ABS, TC and hill hold function cease to function, if applicable. The warning lamp comes on.

How to fix Scania ABS fault code 76?

  1. Check the brakes and the wiring to the wheel speed sensor.
  2. The resistance between the wheel speed sensor pins must be 1,000-1,300 ohms.
  3. If the fault code appears again without the brakes sticking or vibrating, renew the control unit.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 76 in other Scania systems

Compare code 76 in every system →