Scania fault code 14

EMS Engine Management System Control unit Incorrect or unreliable data. Read explanation → TMS Transmission Management System Control unit The application is not running because the control unit has been requested by KWP to stay in boot mode. Read explanation → COO Coordinator Accelerator pedal sensor The voltage in the accelerator pedal sensor circuit has been either above or below the permitted level. The accelerator pedal sensor generates two separate output signals, and the… Read explanation → CUV Visibility system Brake light relay The current consumption on the control unit output has been too high. Read explanation → OPC Opticruise gearbox control Control unit The application is not running because the control unit has been requested by KWP to stay in boot mode. Read explanation → ACC Automatic Climate Control Sun sensor The value from the sun sensor is outside its limits. Short circuit to battery. Read explanation → ACS Articulation Control System Right proportional valve, ACS No signal from the right proportional valve. Read explanation → RET Retarder Control unit Incorrect or unreliable data. Read explanation → AUS Audio System Loudspeaker, short circuit Short circuit to voltage supply in the circuit to the mid-range speaker in the rear right-hand door. Short circuit to voltage supply in the circuit to the right-hand mid-range spea… Read explanation → BWS Clutch pedal The bodywork control unit is configured for the clutch pedal, but it is not receiving any signals from the clutch pedal. Read explanation → CTR Plus sign switch The switch with the plus sign on the CTS unit is jammed. Read explanation → CTS Switch on the operation unit The plus function switch is stuck. Read explanation →