Scania fault code 38

EMS Engine Management System Rail pressure actuator, shorted to high source ECU indicates shorted to high source. Read explanation → VDT Rotational speed sensor Short circuit to battery. Read explanation → ELC Electronically controlled air suspension Solenoid valve for front axle, left-hand side The voltage on the output to the solenoid valve has been too low. Read explanation → ABS Anti-lock Braking System Wheel speed Short circuit in the wheel circuit on the right-hand side of the front axle. Read explanation → CUV Visibility system Windscreen wiper, High speed. Current consumption on the control unit input has exceeded 12 A for 10 sec. Read explanation → LAS Locking and Alarm System Siren No communication or communication interrupted between the siren and the alarm control unit. Read explanation → ACS Articulation Control System End position sensor 2 ACS The end position sensor is activated even though vehicle speed is so high that the articulation unit should be relatively straight. Read explanation → AUS Audio System 12 V output 2, short circuit 12 V output 2 from the electronic control unit to the camera or other ancillary equipment, short circuit to ground. Read explanation →