Scania fault code 524

EMS Engine Management System The temperature according to the fuel manifold pressure and temperature sensor's secondary port does not change The temperature according to the fuel manifold pressure and temperature sensor's secondary port does not change. Read explanation → COO Coordinator Brake pedal sensor The voltage in the brake pedal sensor circuit has been lower than permitted. The brake pedal sensor generates 2 separate output signals. The fault applies to the redundant output s… Read explanation → MBS VIN code, inconsistent The control unit for the main body system (MBS) has interpreted that the VIN code in the memory does not correspond with the VIN code on the vehicle. Read explanation → CUV Visibility system Electrical fault in the sub data bus Short circuit in the sub data bus. Read explanation → BCI Communication fault, external CAN bus Open circuit or short circuit to the external CAN bus. Fault on the external CAN bus. Read explanation → CMS CAN communication on the control unit sub data bus 2 Communication fault or electrical fault on the control unit sub data bus 2. Read explanation → ACS Articulation Control System End position sensor Short circuit to ground in the end position sensor circuit. Read explanation → EST Solenoid valve for mechanical unlocking of the degradation valve Open circuit. Read explanation → ESTA Solenoid valve for mechanical unlocking of the degradation valve Open circuit. Read explanation → DCU VIN code, inconsistent The door control unit has detected that the VIN code in the memory does not correspond with the VIN code on the vehicle. Read explanation → ACSX Right-hand pressure sensor Short circuit to ground in the pressure sensor circuit. Read explanation →