Scania fault code 527

EMS Engine Management System Safety monitor detecting when plausibility test of rail pressure signal and rail pressure sensor fails. The error is detected when the P1P2 comparison error is not present and if the rail pressure signal value has a large difference from the rail pressure sensor or if the rail pressu… Read explanation → COO Coordinator Clutch pedal sensor The voltage in the clutch pedal sensor circuit has been lower than permitted. The clutch pedal sensor generates 2 separate output signals. The fault applies to the normal output si… Read explanation → CUV Visibility system Windscreen wiper, high speed Current consumption on the control unit output has exceeded 20 A for one second. Read explanation → BCI Excess current, C628-20 Excess current or short circuit to ground or supply voltage. Read explanation → ACS Articulation Control System Low supply voltage Voltage supply to the control unit is lower than permitted. Read explanation → EST Solenoid valve for operating mode The fault code is activated when the system detects a higher current than expected in the circuit. Read explanation → ESTA Solenoid valve for operating mode The fault code is activated when the system detects a higher current than expected in the circuit. Read explanation → ACSX Low supply voltage Voltage supply to the control unit is lower than permitted. Read explanation →