Scania fault code 627
Code 627 is used by 10 different Scania systems. Choose the control unit shown in your diagnostic tool:
EMS Engine Management System
Injector, cylinder 5
Short-circuited to ground.
Read explanation →
BMU Battery Management Unit
Propulsion battery, low state of charge
The control unit has interpreted a state of charge below the lowest set level.
Read explanation →
VDT
Internal fault
Open circuit or short to ground.
Read explanation →
COO Coordinator
Low split
The voltage in the low split solenoid valve circuit has been low for longer than permitted.
Read explanation →
MBS
DCU control unit rear, fault in CAN communication
CAN communication with the rear DCU control unit is cancelled or missing.
Read explanation →
CUV Visibility system
Main beam, right-hand side
Fault in the main beam LED module in the right-hand headlamp.
Read explanation →
BCI
Information fault, parking brake
Faulty information regarding the parking brake.
Read explanation →
CMS
Switch, kneeling
The signal from the instrument panel switch for kneeling is implausible. The signal has been active for more than 180 seconds.
Read explanation →
EST
Motor pump unit
Implausible signal from the motor pump unit.
Read explanation →
ESTA
Motor pump unit
Implausible signal from the motor pump unit.
Read explanation →