Scania fault code 776

EMS Engine Management System Steering wheel switch for cruise control, CAN messages missing Read explanation → BMU Battery Management Unit Coolant pump (M41/M85), CAN communication timeout CAN message from coolant pump has not been sent. Read explanation → COO Coordinator DIS control unit, configuration error The coordinator has identified divergent information from the DIS control unit. Read explanation → MBS Sensor for engine compartment door, left-hand, open circuit The voltage supply to the control unit input for the left-hand engine compartment hatch sensor is 12 V. This indicates an open circuit. Read explanation → DDU SMS control unit, no CAN communication The DDU control unit is not receiving CAN messages from the SMS control unit. Read explanation → ICL Instrument Cluster Communication with electronic chassis level control (ELC) No CAN messages from the suspension management system. Read explanation → CMS Fuel pick-up unit 2 The signal from the fuel pick-up unit is implausibly high. The fuel pick-up unit has an open circuit or is short-circuited to voltage. Read explanation → DAS DIS2 control unit The control unit has identified divergent information from the DIS2 control unit. Read explanation → COMMUNICATOR Communicator (C200 / C300 / C400) Communication with the door control system (DCS) The RTC control unit has not received any CAN messages from the DCS control unit within the time expected. Read explanation → DCU Sensing strip, rear door leaf, open circuit - A broken circuit has been detected on the input (CN3-9) for the sensing strip. - The door control unit has measured a resistance on the sensing strip higher than approx. 12,000 o… Read explanation →