Scania fault code 779

EMS Engine Management System Steering wheel switch for cruise control, CAN messages missing Read explanation → COO Coordinator Forward looking camera (FLC) CAN communication with forward looking camera (FLC) is interrupted. Read explanation → MBS Sensor for front hatch fuel tank, open circuit The voltage supply to the control unit input for the front fuel tank hatch sensor is 12 V. This indicates an open circuit. Read explanation → DDU VIS control unit, no CAN communication The DDU control unit is not receiving CAN messages from the VIS control unit. Read explanation → ICL Instrument Cluster Communication with the visibility system (VIS) No CAN messages from the visibility system. Read explanation → CMS Fuel level monitor for fuel optimisation unit, broken circuit The fuel level monitor circuit is open. Read explanation → DAS Forward looking camera CAN communication with the forward looking camera (FLC) is interrupted. Read explanation → COMMUNICATOR Communicator (C200 / C300 / C400) Communication with the bus chassis system (BCS) The RTC control unit has not received any CAN messages from the BCS control unit within the time expected. Read explanation → DCU Long activation of sensing strip, front or single door leaf, active The door control unit detects a permanent activation (CN3-11) of the sensing strip which lasts more than 20 seconds. Read explanation →