Scania fault code 832

EMS Engine Management System Camshaft position sensor T135 The camshaft position sensor has an open circuit. Read explanation → BMU Battery Management Unit Insulation fault on external positive side The electrical insulation between the positive terminal and earth outside the propulsion battery is too low, lower than 4 kohm. Read explanation → EMD Camshaft position sensor T135 The camshaft position sensor has an open circuit. Read explanation → EME Camshaft position sensor T135 The camshaft position sensor has an open circuit. Read explanation → EMO Camshaft position sensor T135 The camshaft position sensor has an open circuit. Read explanation → VDT Gearbox oil The limit value for the gearbox oil temperature has been exceeded Read explanation → MBS Windscreen defroster, damper fault - The sensor indicates an implausible value. - Short circuit in the control of the damper to the windscreen defroster. Read explanation → PCS CAN message missing The number of received messages does not match the control number. Read explanation → CMS Open circuit in the CAN communication with the TMS control unit. The CMS control unit has detected that there is no CAN message from the TMS control unit. Read explanation → DCC High voltage in the direct current converter (DCC) on the voltage class B side It has been detected that the voltage is too high on the cable harness with voltage class B. Read explanation →