Variant 1
Applies to: CUV2
What does Scania CUV fault code 584 mean?
Current consumption on the control unit output has exceeded 5 A for one second.
What causes Scania DTC 584?
Too many lamps are connected, there is a short circuit in a lamp or short circuit to ground.
How does the system react?
The work light is inoperative. Every time the function is activated, the current consumption on the control unit output is checked. If the current consumption is too high, the output is switched off and a fault code is registered.
How to fix Scania CUV fault code 584?
Check the number of connected lamps, faulty lamps or short circuit to ground.
Variant 2
Applies to: CUV3 (VIS)
Detection
Current consumption on the control unit output has exceeded 5 A for one second.
Possible cause
Too many lamps are connected, there is a short circuit in a lamp or short circuit to ground.
System reaction
Every time the function is activated, the current consumption on the control unit output is checked. If the current consumption is too high, the output is switched off and a fault code is registered.
Symptoms
The work light is inoperative.
How to fix
Check the number of connected lamps, faulty lamps or short circuit to ground.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.