Scania EME DTC 113 Main mirror and wide-angle mirror heater element on the driver's side

EME EME control unit · Scania

Code 113 (decimal). Some diagnostic tools show it in hexadecimal as 0071.

In short

The main mirror and wide-angle mirror heater element on the driver's side H2 indicates an implausibly low temperature compared with the main mirror and wide-angle mirror heater element on the passenger side H3 and the temperature sensor in the intake manifold (T126 or T202).

Applies to: EME1

What does Scania EME fault code 113 mean?

The main mirror and wide-angle mirror heater element on the driver's side H2 indicates an implausibly low temperature compared with the main mirror and wide-angle mirror heater element on the passenger side H3 and the temperature sensor in the intake manifold (T126 or T202).

What causes Scania DTC 113?

Possible causes: - Fault in the main mirror and wide-angle mirror heater element on the driver's side H2. - Fault in the harness-to-component connectors or cable harness of the main mirror and wide-angle mirror heater element on the driver's side H2. - The main mirror and wide-angle mirror heater element on the driver's side H2 has been exposed to abnormally low temperatures compared with the main mirror and wide-angle mirror heater element on the passenger side H3 and the temperature sensor in the intake manifold (T126 or T202).

How does the system react?

If the vehicle is equipped with EGR, there is a risk that the EGR system will shut down at low ambient temperatures.

How to fix Scania EME fault code 113?

  1. Compare the temperature between the main mirror and wide-angle mirror heater element on the driver's side H2, the main mirror and wide-angle mirror heater element on the passenger side H3 and the temperature sensor in the intake manifold (T126 or T202).
  2. Check the harness-to-component connectors and cable harness of the main mirror and wide-angle mirror heater element on the driver's side H2.
  3. Renew the main mirror and wide-angle mirror heater element on the driver's side H2.
  4. Verification To verify that the fault has been rectified, drive the vehicle at more than 30 km/h for more than 2 minutes.
  5. If the fault has been rectified, the fault code becomes inactive and can be cleared.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 113 in other Scania systems

Compare code 113 in every system →