Applies to: BCS1
What does Scania BCS fault code 5 mean?
Incorrect data.
What causes Scania DTC 5?
The control unit is not configured.
How does the system react?
Yellow warning lamp shown in the instrument cluster.
How to fix Scania BCS fault code 5?
- If the control unit has not been configured previously:
- Configure the control unit using Scania Diagnos Programmer.
- Erase all fault codes.
- Reset the control unit.
- If the fault code recurs on start-up, renew the control unit.
- If the control unit was working previously, renew the control unit.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 5 in other Scania systems
- 5hex 0005 Red CAN bus
- 5hex 000005 Loudspeaker channel 2, short circuit to earth
- 5hex 0005 Communication with the CUV control unit
- 5hex 0005 Water valve
- 5hex 0005 Communication with the tachograph
- 5hex 0005 Switch on the operation unit
- 5hex 0005 Switch for starting the auxiliary heater
- 5hex 0005 Supply voltage too high.
- 5hex 000005 CAN bus, no communication
- 5hex 0005 Control unit
- 5hex 0005 Control unit
- 5hex 0005 INFO button
- 5hex 0005 Rotational speed sensor
- 5hex 0005 Direction indicator front right.