Applies to: CUV1
What does Scania CUV fault code 5 mean?
The current consumption on the control unit output has exceeded 4 A.
What causes Scania DTC 5?
Short circuit in the relay for current consuming equipment R19 or in the cable harness.
How does the system react?
Right-hand front direction indicator is inoperative. Every time the function is activated, the current consumption on the control unit output is checked. If the current consumption is too high, the output is switched off and a fault code is registered.
How to fix Scania CUV fault code 5?
- Check the bulbs.
- Also, check the number of connected lamps in circuit.
- Check whether there is a short circuit to earth.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 5 in other Scania systems
- 5hex 0005 Red CAN bus
- 5hex 000005 Loudspeaker channel 2, short circuit to earth
- 5hex 0005 Control unit
- 5hex 0005 Communication with the CUV control unit
- 5hex 0005 Water valve
- 5hex 0005 Communication with the tachograph
- 5hex 0005 Switch on the operation unit
- 5hex 0005 Switch for starting the auxiliary heater
- 5hex 0005 Supply voltage too high.
- 5hex 000005 CAN bus, no communication
- 5hex 0005 Control unit
- 5hex 0005 Control unit
- 5hex 0005 INFO button
- 5hex 0005 Rotational speed sensor