Applies to: ICL1
What does Scania ICL fault code 5 mean?
INFO button is short-circuited to earth or battery voltage.
What causes Scania DTC 5?
The INFO button is short-circuited to earth or battery voltage, or not connected at all. The clock spring is defective. The INFO button is defective.
How to fix Scania ICL fault code 5?
Check the cable harness, the coil spring and the INFO button.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 5 in other Scania systems
- 5hex 0005 Red CAN bus
- 5hex 000005 Loudspeaker channel 2, short circuit to earth
- 5hex 0005 Control unit
- 5hex 0005 Communication with the CUV control unit
- 5hex 0005 Water valve
- 5hex 0005 Communication with the tachograph
- 5hex 0005 Switch on the operation unit
- 5hex 0005 Switch for starting the auxiliary heater
- 5hex 0005 Supply voltage too high.
- 5hex 000005 CAN bus, no communication
- 5hex 0005 Control unit
- 5hex 0005 Control unit
- 5hex 0005 Rotational speed sensor
- 5hex 0005 Direction indicator front right.