Scania fault code 15

EMS Engine Management System Control unit Incorrect or unreliable data. Read explanation → TMS Transmission Management System Control unit The application is not running because the control unit has been requested via CCP to stay in boot mode. Read explanation → COO Coordinator Accelerator pedal sensor The accelerator pedal sensor's two output signals (normal and redundant) have been implausible in relation to each other. Read explanation → CUV Visibility system Spotlights in sun visor. The current consumption on the control unit output has exceeded 12A. Read explanation → OPC Opticruise gearbox control Control unit The application is not running because the control unit has been requested via CCP to stay in boot mode. Read explanation → ACS Articulation Control System Left proportional valve, ACS No signal from the left proportional valve. Read explanation → RET Retarder Control unit Incorrect or unreliable data. Read explanation → AUS Audio System Loudspeaker, short circuit Short circuit to ground in the mid-range speaker circuit in the rear right-hand door. Short circuit to ground in the circuit for the right-hand mid-range speaker. | Short circuit t… Read explanation → BCS Communication with the engine management system (EMS) Communication with the engine management system (EMS) has been terminated. Read explanation → BWS Clutch pedal The bodywork control unit is not configured for the clutch pedal, but it receives signals from the clutch pedal. Read explanation → CTR Switch Several switches on the CTS unit are jammed. Read explanation → CTS Switch on the operation unit Several switches are stuck in the depressed position. Read explanation →