Applies to: BWS1
What does Scania BWS fault code 15 mean?
The bodywork control unit is not configured for the clutch pedal, but it receives signals from the clutch pedal.
What causes Scania DTC 15?
Fault in the configuration of the coordinator or bodywork control unit.
How does the system react?
The engine speed remote control function will limit the engine speed to a safe level as long as the fault code is active. Functions which are dependent on the clutch pedal work to a limited extent or not at all. The fault code can only be activated when the vehicle has a clutch pedal.
How to fix Scania BWS fault code 15?
Check the configuration of the coordinator and bodywork control unit.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 15 in other Scania systems
- 15hex 000F Left proportional valve, ACS
- 15hex 000F Loudspeaker, short circuit
- 15hex 000F Communication with the engine management system (EMS)
- 15hex 000F Accelerator pedal sensor
- 15hex 000F Switch on the operation unit
- 15hex 000F Switch
- 15hex 000F Control unit
- 15hex 000F Control unit
- 15hex 000F Control unit
- 15hex 000F Control unit
- 15hex 000F Spotlights in sun visor.