Applies to: BWS1
What does Scania BWS fault code 16 mean?
The parameters in the bodywork control unit have no value set.
What causes Scania DTC 16?
The bodywork control unit has not been programmed at the factory.
How does the system react?
The fault code is ignored while the control unit is starting up, i.e. just after the key has been turned to drive position (15 supply).
How to fix Scania BWS fault code 16?
- Spare parts program the bodywork control unit.
- If this does not help, renew the control unit.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 16 in other Scania systems
- 16hex 0010 Right-hand damping cylinder, ACS
- 16hex 0010 Central mid-range speaker, short circuit
- 16hex 0010 Communication with the gearbox management system (GMS)
- 16hex 0010 Cab temperature sensor
- 16hex 0010 Brake pedal sensor
- 16hex 0010 Display on the operation unit
- 16hex 0010 Display
- 16hex 0010 Sensor
- 16hex 000010 Cold start exhaust cam phaser target error
- 16hex 0010 Control unit
- 16hex 0010 Control unit
- 16hex 0010 Control unit
- 16hex 0010 Battery box sensor
- 16hex 0010 Rotational speed sensor
- 16hex 0010 Spotlights in bumper.