Scania fault code 16

EMS Engine Management System Cold start exhaust cam phaser target error Exhaust phaser not able to hold reference position Read explanation → TMS Transmission Management System Control unit The application is not running because of a faulty command when reprogramming the control unit. Read explanation → VDT Rotational speed sensor Open circuit. Read explanation → COO Coordinator Brake pedal sensor The voltage in the brake pedal sensor circuit has been either above or below the permitted level. The brake pedal sensor generates two separate output signals and the fault applies… Read explanation → CUV Visibility system Spotlights in bumper. The current consumption on the control unit output has exceeded 12A. Read explanation → LAS Locking and Alarm System Battery box sensor The voltage on the alarm control unit input has been below 3 V. Read explanation → OPC Opticruise gearbox control Control unit The application is not running because of a faulty command when reprogramming the control unit. Read explanation → ACC Automatic Climate Control Cab temperature sensor The cab temperature sensor value is outside its limits. Read explanation → DIS Sensor Sensor field of visibility is reduced. Read explanation → ACS Articulation Control System Right-hand damping cylinder, ACS The oil pressure in the right-hand damping cylinder deviates from the expected value. The expected pressure is calculated using the right-hand pressure sensor and the articulation… Read explanation → RET Retarder Control unit Incorrect or unreliable data. Read explanation → AUS Audio System Central mid-range speaker, short circuit Short circuit to voltage supply in the circuit to the loudspeaker. Read explanation → BCS Communication with the gearbox management system (GMS) Communication with the gearbox management system (GMS) has been terminated. Read explanation → BWS Bodywork control unit The parameters in the bodywork control unit have no value set. Read explanation → CTR Display Internal fault in the display. Read explanation → CTS Display on the operation unit Communication fault in the LCD screen. Read explanation →