Applies to: TMS1
What does Scania TMS fault code 16 mean?
The application is not running because of a faulty command when reprogramming the control unit.
What causes Scania DTC 16?
Internal fault.
How does the system react?
Engagement of the freewheeling retarder is stopped if retarder oil pressure is too high so as not to damage the synchroniser. The oil pressure must be checked before engaging the freewheeling retarder. If retarder pressure is too high, there is no engagement.
How to fix Scania TMS fault code 16?
- First clear all fault codes.
- Switch off and restart the vehicle.
- If the fault codes are still displayed, renew the control unit.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 16 in other Scania systems
- 16hex 0010 Right-hand damping cylinder, ACS
- 16hex 0010 Central mid-range speaker, short circuit
- 16hex 0010 Communication with the gearbox management system (GMS)
- 16hex 0010 Bodywork control unit
- 16hex 0010 Cab temperature sensor
- 16hex 0010 Brake pedal sensor
- 16hex 0010 Display on the operation unit
- 16hex 0010 Display
- 16hex 0010 Sensor
- 16hex 000010 Cold start exhaust cam phaser target error
- 16hex 0010 Control unit
- 16hex 0010 Control unit
- 16hex 0010 Battery box sensor
- 16hex 0010 Rotational speed sensor
- 16hex 0010 Spotlights in bumper.