Applies to: ACC1
What does Scania ACC fault code 16 mean?
The cab temperature sensor value is outside its limits.
What causes Scania DTC 16?
Fault in the ACC control unit
How does the system react?
The A/C system switches to manual control (0-10) and to a preset temperature value. The AC operates at maximum if 0-4 is selected.
How to fix Scania ACC fault code 16?
- Use SDP3 to check the value from the cab temperature sensor.
- Clear the fault codes in the ACC control unit.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 16 in other Scania systems
- 16hex 0010 Right-hand damping cylinder, ACS
- 16hex 0010 Central mid-range speaker, short circuit
- 16hex 0010 Communication with the gearbox management system (GMS)
- 16hex 0010 Bodywork control unit
- 16hex 0010 Brake pedal sensor
- 16hex 0010 Display on the operation unit
- 16hex 0010 Display
- 16hex 0010 Sensor
- 16hex 000010 Cold start exhaust cam phaser target error
- 16hex 0010 Control unit
- 16hex 0010 Control unit
- 16hex 0010 Control unit
- 16hex 0010 Battery box sensor
- 16hex 0010 Rotational speed sensor
- 16hex 0010 Spotlights in bumper.