Scania fault code 4097

EMS Engine Management System Engine speed The engine speed has been above the permitted level. Read explanation → EMU Temperature sensor T273, battery circuit 1, short circuit to voltage supply The control unit states an implausibly high voltage, which indicates an open circuit. Read explanation → BMU Battery Management Unit Voltage supply to BMU control unit The voltage supply to the BMU control unit is above the maximum permitted value, 36 V. Read explanation → MGU MGU control unit, incorrect torque The calculated torque is not correct. Read explanation → PCS Friction torque of ICE erroneous signal PCS has detected an erroneous value of friction torque reported by ICE on CAN4. Read explanation → AMS Exhaust gas aftertreatment (SCR), interrupted post circulation of reductant The EEC control unit was not switched off correctly. Read explanation → EEC Exhaust Emission Control Exhaust gas aftertreatment (SCR), interrupted post circulation of reductant The EEC control unit was not switched off correctly. Read explanation → ICL Instrument Cluster General function indication, warning Fault in the driver or the indication's LED-lamp. Read explanation → GSC High pressure solenoid valve The GSC control unit has interpreted that the pressure in the fuel system has not decreased even though all the high pressure solenoid valves have been closed for a short period of… Read explanation →