Scania ICL DTC 512 Button panel, steering wheel

ICL Instrument Cluster · Scania · 2 variants

Code 512 (decimal). Some diagnostic tools show it in hexadecimal as 0200.

In short

One or more buttons in the steering wheel button panel has been depressed for more than 60 seconds.

Variant 1

Applies to: ICL3 (ICL)

What does Scania ICL fault code 512 mean?

One or more buttons in the steering wheel button panel has been depressed for more than 60 seconds.

What causes Scania DTC 512?

- One or some of the button outputs are shorted to ground. - One or some of the buttons are defective.

What are the symptoms?

One or more of the instrument cluster buttons does not work.

How to fix Scania ICL fault code 512?

  1. Check the cable harness.
  2. Renew the button panel.

Variant 2

Applies to: ICL3

Detection

One or more buttons in the steering wheel button panel has been depressed for more than 60 seconds.

Possible cause

The cause can be one of the following: - One or some of the button outputs are shorted to ground. - One or some of the buttons are defective.

System reaction

One or more of the instrument cluster buttons does not work.

How to fix

  1. Check the cable harness.
  2. Renew the button panel.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 512 in other Scania systems

Compare code 512 in every system →