Applies to: CTS2 (CTS)
What does Scania CTS fault code 8 mean?
The snooze function switch is stuck.
What causes Scania DTC 8?
Mechanical fault. A fault code is generated when the switch has been depressed for more than 2 minutes. The fault code is deleted when the switch returns to the normal position or when another switch is stuck in the depressed position.
What are the symptoms?
The switch is inoperative.
How to fix Scania CTS fault code 8?
- Check the switch.
- Renew the CTS unit if the switch does not return to normal operation.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 8 in other Scania systems
- 8hex 0008 End position sensor and angle sensor, ACS
- 8hex 000008 Loudspeaker channel 3, short circuit to earth
- 8hex 0008 Loudspeaker, short circuit
- 8hex 0008 Control unit
- 8hex 0008 Communication with the lilac CAN bus
- 8hex 0008 Communication with the APS control unit
- 8hex 0008 Auxiliary heater
- 8hex 0008 Communication with the instrument cluster
- 8hex 0008 Switch for sleep-in function
- 8hex 000008 Internal fault, missing UART message
- 8hex 0008 Control unit
- 8hex 0008 Control unit
- 8hex 0008 Control unit
- 8hex 0008 Rotational speed sensor
- 8hex 0008 Direction indicator rear left.