Applies to: CTS2 (CTS)
What does Scania CTS fault code 9 mean?
The infotainment system switch is stuck.
What causes Scania DTC 9?
Mechanical fault. A fault code is generated when the switch has been depressed for more than 2 minutes. The fault code is deleted when the switch returns to the normal position or when another switch is stuck in the depressed position.
What are the symptoms?
The switch is inoperative.
How to fix Scania CTS fault code 9?
- Check the switch.
- Renew the CTS unit if the switch does not return to normal operation.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 9 in other Scania systems
- 9hex 0009 Angle sensor, ACS
- 9hex 000009 Loudspeaker channel 3, break in circuit
- 9hex 0009 Loudspeaker, short circuit
- 9hex 0009 Communication with the articulation control system (ACS)
- 9hex 0009 Parking brake signal
- 9hex 0009 Roof hatch
- 9hex 0009 Signals from the starter lock
- 9hex 0009 CD switch
- 9hex 000009 Too great a difference between 30 voltage and wake-up signal
- 9hex 000009 Cold start intake cam phaser target error
- 9hex 0009 Control unit
- 9hex 0009 Rotational speed sensor
- 9hex 0009 Direction indicators on trailer, right.