Applies to: ACS5
What does Scania ACS fault code 9 mean?
The signal from the angle sensor is outside its range.
What causes Scania DTC 9?
Short circuit or open circuit in the angle sensor circuit. Defective angle sensor. Angle sensor is not in the correct position.
How does the system react?
The ACS warning indication is displayed. Limp home mode will be activated.
How to fix Scania ACS fault code 9?
- Check angle sensor.
- Check cable harness and connectors.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 9 in other Scania systems
- 9hex 000009 Loudspeaker channel 3, break in circuit
- 9hex 0009 Loudspeaker, short circuit
- 9hex 0009 Communication with the articulation control system (ACS)
- 9hex 0009 Parking brake signal
- 9hex 0009 Roof hatch
- 9hex 0009 Signals from the starter lock
- 9hex 0009 Switch on the operation unit
- 9hex 0009 CD switch
- 9hex 000009 Too great a difference between 30 voltage and wake-up signal
- 9hex 000009 Cold start intake cam phaser target error
- 9hex 0009 Control unit
- 9hex 0009 Rotational speed sensor
- 9hex 0009 Direction indicators on trailer, right.