S'applique à: EMS10
Que signifie le code défaut Scania EMS 9 ?
Intake phaser not able to hold reference position
Quelle est la cause du DTC 9 de Scania ?
Wrong viscosity oil used. Oil pressure/supply to cam phaser is too low. Bias spring loose from mounting point. Debris in the cam phaser or control valve. Actuator malfunction. Cam torque to high. Cam phaser malfunction. Control valve malfunction. Sump oil temperature sensor malfunction.
Quels sont les symptômes ?
Engine performance will be impacted. Can cause engine noise.
Comment corriger le code défaut Scania EMS 9 ?
- Visually check that the cam phaser bias spring is mounted correctly.
- Check that cam phaser system has sufficient oil pressure and flow.
- Rotate the engine, check that the resistance isn’t abnormally high.
- Check that the sump oil temperature sensor is working as intended.
- Check actuator fault codes, check that the actuator moves without problem.
- If there is any fault with the actuator replace it.
- Check that the control valve spool moves smoothly and don’t stick in any position.
- Change oil, remove fault codes, test drive.
- If problem persists change cam phaser and control valve.
Ces informations sont fournies à titre indicatif uniquement. Suivez toujours le manuel d'atelier du constructeur et les procédures de sécurité ; en cas de doute, contactez un atelier agréé.
Code 9 dans les autres systèmes Scania
- 9hex 0009 Capteur d'angle, ACS
- 9hex 000009 Canal de haut-parleur 3, coupure dans le circuit
- 9hex 0009 Haut-parleur, court-circuit
- 9hex 0009 Communication avec le système de contrôle d'articulation (ACS)
- 9hex 0009 Signal de frein de stationnement
- 9hex 0009 Toit ouvrant
- 9hex 0009 Signaux provenant de la serrure de démarrage
- 9hex 0009 Activer l'unité de manœuvre
- 9hex 0009 Commutateur de CD
- 9hex 000009 Différence trop importante entre le + avant contact et le signal de réveil
- 9hex 0009 Module de commande
- 9hex 0009 Capteur de vitesse de rotation
- 9hex 0009 Clignotants sur la remorque, côté droit.