Scania EMS DTC 9 Cold start intake cam phaser target error

EMS System zarządzania silnikiem · Scania

Kod 9 (dziesiętnie). Niektóre testery diagnostyczne pokazują go szesnastkowo jako 000009.

W skrócie

Intake phaser not able to hold reference position

Dotyczy: EMS10

Co oznacza kod błędu Scania EMS 9?

Intake phaser not able to hold reference position

Co powoduje kod DTC 9 marki Scania?

Wrong viscosity oil used. Oil pressure/supply to cam phaser is too low. Bias spring loose from mounting point. Debris in the cam phaser or control valve. Actuator malfunction. Cam torque to high. Cam phaser malfunction. Control valve malfunction. Sump oil temperature sensor malfunction.

Jakie są objawy?

Engine performance will be impacted. Can cause engine noise.

Jak naprawić kod błędu Scania EMS 9?

  1. Visually check that the cam phaser bias spring is mounted correctly.
  2. Check that cam phaser system has sufficient oil pressure and flow.
  3. Rotate the engine, check that the resistance isn’t abnormally high.
  4. Check that the sump oil temperature sensor is working as intended.
  5. Check actuator fault codes, check that the actuator moves without problem.
  6. If there is any fault with the actuator replace it.
  7. Check that the control valve spool moves smoothly and don’t stick in any position.
  8. Change oil, remove fault codes, test drive.
  9. If problem persists change cam phaser and control valve.

Te informacje mają charakter wyłącznie poglądowy. Zawsze postępuj zgodnie z instrukcją warsztatową producenta oraz procedurami bezpieczeństwa; w razie wątpliwości skontaktuj się z autoryzowanym warsztatem.

Kod 9 w innych systemach Scania

Porównaj kod 9 we wszystkich systemach →