Scania EMS DTC 9 Cold start intake cam phaser target error

EMS ระบบจัดการเครื่องยนต์ · Scania

รหัส 9 (เลขฐานสิบ) เครื่องมือวินิจฉัยบางเครื่องแสดงเป็นเลขฐานสิบหกคือ 000009

สรุปสั้น ๆ

Intake phaser not able to hold reference position

ใช้ได้กับ: EMS10

รหัสข้อผิดพลาด Scania EMS 9 หมายความว่าอย่างไร?

Intake phaser not able to hold reference position

อะไรเป็นสาเหตุของรหัส DTC 9 ของ Scania?

Wrong viscosity oil used. Oil pressure/supply to cam phaser is too low. Bias spring loose from mounting point. Debris in the cam phaser or control valve. Actuator malfunction. Cam torque to high. Cam phaser malfunction. Control valve malfunction. Sump oil temperature sensor malfunction.

มีอาการอย่างไรบ้าง?

Engine performance will be impacted. Can cause engine noise.

วิธีแก้ไขรหัสข้อผิดพลาด Scania EMS 9?

  1. Visually check that the cam phaser bias spring is mounted correctly.
  2. Check that cam phaser system has sufficient oil pressure and flow.
  3. Rotate the engine, check that the resistance isn’t abnormally high.
  4. Check that the sump oil temperature sensor is working as intended.
  5. Check actuator fault codes, check that the actuator moves without problem.
  6. If there is any fault with the actuator replace it.
  7. Check that the control valve spool moves smoothly and don’t stick in any position.
  8. Change oil, remove fault codes, test drive.
  9. If problem persists change cam phaser and control valve.

ข้อมูลนี้ใช้เป็นแนวทางเท่านั้น โปรดปฏิบัติตามคู่มือการซ่อมของผู้ผลิตและขั้นตอนความปลอดภัยเสมอ หากไม่แน่ใจ ให้ติดต่อศูนย์บริการที่ได้รับอนุญาต

รหัส 9 ในระบบอื่นของ Scania

เปรียบเทียบรหัส 9 ในทุกระบบ →