Scania fault code 4177

EMS Engine Management System Emissions of nitrogen oxides (NOx) More than a couple of hours have passed with too low an exhaust gas temperature. This means that the calculated amount of hydrocarbons that have not been burned is too high. Read explanation → EMU Heater H39, short circuit to earth The control unit indicates that the heater supply signal voltage is too low. Read explanation → BMU Battery Management Unit Cell monitoring circuit board, different part numbers The cell monitoring circuit boards have different part numbers. Read explanation → EMD High hydrocarbon content in the aftertreatment system Hydrocarbon content is above critical level Read explanation → EME High hydrocarbon content in the aftertreatment system Hydrocarbon content is above critical level Read explanation → EMO Excessive hydrocarbon level in aftertreatment, engine still running The stored hydrocarbon level in the Aftertreatment is above the critical level. Read explanation → DDU Right speaker 1, short circuit in wiring harness Information is missing, update is in progress. Read explanation → ICL Instrument Cluster General red alarm Internal fault. General red alarm not working. Read explanation → GSC High pressure solenoid valve Incorrect level on current signal through the solenoid valve coil. Read explanation →