Scania CUV DTC 515 Control unit

CUV Visibility system · Scania · 2 variants

Code 515 (decimal). Some diagnostic tools show it in hexadecimal as 0203.

In short

Memory used to store configuration data is inconsistent.

Variant 1

Applies to: CUV2

What does Scania CUV fault code 515 mean?

Memory used to store configuration data is inconsistent.

What causes Scania DTC 515?

Susceptible to extensive electromagnetic radiation.

What are the symptoms?

The control unit restarts. Then it will function as normal.

How to fix Scania CUV fault code 515?

  1. No action is required if the fault code is seldom generated (up to five times).
  2. If the fault code recurs, check whether the electrical installation in the vehicle has uncertified third party equipment and remove this if so.
  3. Renew the control unit if the problem persists.

Variant 2

Applies to: CUV3 (VIS)

Detection

Memory used to store configuration data is inconsistent.

Possible cause

Susceptible to extensive electromagnetic radiation.

Symptoms

The control unit restarts the software.

How to fix

  1. No action is required if the fault code is seldom generated (up to five times).
  2. If the fault code recurs, check whether the electrical installation in the vehicle has uncertified third party equipment and remove this if so.
  3. Renew the control unit if the problem persists.

This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.

Code 515 in other Scania systems

Compare code 515 in every system →