Applies to: EST1 (EST)
What does Scania EST fault code 517 mean?
Operational data has been lost.
What causes Scania DTC 517?
The fault code is activated when operational data cannot be read upon starting the system as it is incorrect or completely missing. The fault may be due to: - Interference in the voltage supply to the control unit when the operational data was saved.
What are the symptoms?
Operational data cannot be read.
How to fix Scania EST fault code 517?
- If the fault code has been activated once no action is necessary.
- If the fault code recurs:
- Check the system voltage supply.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 517 in other Scania systems
- 517hex 0205 Operational data
- 517hex 0205 Operational data
- 517hex 0205 Micro switch door lock passenger side (truck)/micro switch A2 (bus), open circuit
- 517hex 0205 Control unit, operational data
- 517hex 0205 Control unit
- 517hex 0205 Operational data missing
- 517hex 0205 Operational data
- 517hex 0205 Accelerator pedal sensor
- 517hex 0205 Control unit
- 517hex 0205 Cylinder 5
- 517hex 0205 Cylinder 5
- 517hex 0205 Cylinder 5
- 517hex 0205 Cylinder 5
- 517hex 0205 Control unit
- 517hex 0205 Control unit
- 517hex 0205 Motion sensor in bodywork
- 517hex 0205 #Not implemented. Operation data stored in the persistent memory has been lost.
- 517hex 0205 TCC control unit, operational data fault
- 517hex 0205 Power transmission check, no CAN message
- 517hex 0205 Output signal